Enquiry Now

Three-Point Hitch 70.4100

Three-Point Hitch 70.4100

Specification

The Category One 3-Point Hitch adds the benefit of using numerous light and medium-duty implements* on the rear of Ventrac 4000 Series Tractors. An eight-inch stroke hydraulic cylinder lifts up to 750 pounds (340 kg) at the draw bar through a 14 inch (26 cm) lift range. Each draft bar has a fast pin, adjustable stabilizing bar, and adjustable lift linkage.

Ball joints for the draw bar and implement mounting have lift range from 10 to 24 inches (25 to 61 cm)** and can be adjusted downward five inches (13 cm).

The 3-Point Hitch includes three 42 pound (19 kg) ballast weights, two sets of rear remote hydraulic outlets, and an adjustable top link. A lock-hole provision is provided for down pressure.Control Levers are located directly to the right of the S.D.L.A. Control Assembly. The inside lever controls the up/down function of the 3-Point Hitch. The middle lever controls the left rear set of hydraulic couplers while the outer lever controls the right rear set of hydraulic couplers. These twin sets of couplers allows the operator to operate Ventrac Non-PTO power attachments mounted to the 3-N-1 Adapter mounted on the 3-Point Hitch. Other non-Ventrac attachments can be mounted to the 3-Point Hitch as well

*Non-PTO Powered attachments only
**Measurements may vary according to tire size or inflation


The versatile Ventrac Spreader ES220 is designed and built to spread Seed, Fertilizer and Penn Mulch. The spreader is capable of being rear or front mounted. An electronic control box comes standard and features an electronic speed control and On/Off switch The mounting hitch is a standard 2 inch receiver which means this spreader not only will work on Ventrac tractors but also can be fitted to any vehicle with a 2 inch receiving hitch.

STANDARD FEATURES

  • Additional mounting options
  • Tri-Lever Control Valve
  • Twin Sets Rear Remote Hydraulic Outlets
  • 2 inch Reese Hitch with Receiver

SPECIFICATIONS

Stock Code

70.4100

3-Point Category

1

Lift Range

14 inches (26 cm)

Lift Capacity

750 lbs (340 kg)

Control

Dual Lever Control

Weight Ballast

(3) 42 lbs (19 kg), 126 lbs (60 kg) total

Shipping Weight

240 lbs (108.9 kg)

Optional Hydraulic Top Link

70.4038

ventrac attachments