Enquiry Now

Dual Wheel Kit 70.4067

Dual Wheel Kit 70.4067

Specification

Stock Code

 

All Terrain

70.4067 (1 kit per tractor)

Turf

70.4068 (1 kit per tractor)

Bar

70.4069 (1 kit per tractor)

Weight

80 lbs (36.25 kg) (per axle)

Additional Tractor Width

24 inches (12 inches/tire) (61 cm)

All specifications subject to change without notice or obligation

Note:

(A) Do NOT use dual wheels when using the Ventrac VERSA-Loader.
(B) Engine manufacturers’ maximum angle of operation is 25° for continuous use (all directions) and 30° intermittent use*. The 4500P Kawasaki DFI is rated for 30° continuous use.
(C) Do NOT use with Wheel Extensions * Intermittent use is up to 10 minutes on the slope, then return to level ground before returning to the slope.


Dual Wheels are available for the 4000 series tractors. They are designed to increase stability, traction, and safety on slopes. Dual wheels are also great for reduction of soil compaction on delicate ground. Once the dual hubs have been installed on each wheel, the duals can be quickly mounted and dismounted. (Outside Dual tires should be inflated to a maximum of 4 psi).
Duals are recommended for sandy soils or where a broad distribution of tractor weight is desired, including when driving sideways on slopes greater than 20 degrees (not to exceed 30 degrees).
Duals are only one of numerous considerations for safety on slopes; speed, terrain, irregularities, and stopping the unit are other serious factors to consider for safe operation of the tractor.


Dual Wheel Kit 70.4067

ventrac attachments